All posts in Material Guide

The aluminum and aluminum alloy materials are heated to a certain temperature and kept for a certain period of time to obtain the expected product structure and performance. The Basic Principle Of Aluminum And Aluminum Alloys Heat Treatment Annealing: The product is heated to a certain temperature and kept for a certain period of time and then cooled to room temperature at a certain cooling rate. Through atomic diffusion and migration, the organization is made more uniform and stable, and the internal stress is eliminated, which can greatly improve the plasticity of the material, but the strength will be reduced. Ingot homogenization annealing: keep the ingot at high temperature for Read more

There are many product categories for aluminum alloy processing. Today, high-strength aluminum alloys generally refer to super-hard aluminum alloys of the aluminum-zinc-magnesium-copper-aluminum alloy series. High-strength aluminum alloys are aluminum alloys with a strength greater than 480 MPa. The demand for this kind of aluminum alloy is also increasing, so that the processing technology of high-strength aluminum alloy is also gradually being studied. The Application Field Of Aluminum Alloy All kinds of aircraft use aluminum alloy as the main structural material. Skins, beams, ribs, stringers, bulkheads, and landing gear on aircraft can all be made of aluminum alloys. The amount of aluminum used in the aircraft varies according to its purpose. Read more

AL6061, AL6063 and AL6005 are collectively referred to as 6××× series aluminum alloys. AL6061, AL6063 and AL6005 are commonly used aluminum alloy material grades. The less commonly used 6××× series aluminum alloys are 6009, 6010, 6061, 6063, 6066, 6070 , 6101, 6151, 6201, 6205, 6262, 6351, 6463, 6A02. This pile of numbers looks a bit dazzling, it doesn’t matter, there are still a bunch of chemical symbols below. Chemical composition of AL6061: Its main chemical composition is (mass fraction of each element): Copper Cu: 0.15～0.4 Manganese Mn:0.15 Magnesium Mg: 0.8～1.2 Zinc Zn: 0.25 Chromium Cr: 0.04～0.35 Titanium Ti: 0.15 Silicon Si: 0.4～0.8 Iron Fe: 0.7 Aluminum Al : Allowance AL6061 Read more