The Installation Steps Of Aluminum Profile Trunking

The function and characteristics of aluminum profile wire ducts are believed to be understood by everyone. Recently, many small partners have responded that they do not know how to install aluminum alloy wire ducts. In fact, as long as you know these four steps to install aluminum profile wire ducts, it is easy to install Not difficult. Today, the editor will talk about the four steps of installing aluminum profile trunking! Steps to install aluminum profile trunking:

• Step 1: Measure the size, use an angle grinder or a small cutting machine to cut two 45-degree beveled butt joints at the corners
• Step 2: Use an electric drill to fix the expansion screw in the bottom slot on the wall where the open line is to be laid, or fix it with glass glue
• Step 3: Arrange the wires or network cables in the bottom slot, if multiple wires can be fastened with cable ties
• Step 4: Fasten the cover. Note that the connecting corners on both sides of the cover should be fastened to the outside of the bottom groove, and the short side is the cover!

---

Be-cu aluminum machining china prototype company service include : aluminum cnc turning, aluminum milling service, aluminum extrusions, 5 axis machining aluminum, swiss machining aluminum, aluminum guide,aluminum products